GDW-200F/300F Igwe nleba anya eletrọnịkị zuru ụwa ọnụ na nke dị ala


  • Ike:200kN/300kN
  • Ọsọ isi isi:0.05-500 mm/min
  • izi ezi:0.5
  • Ike:220V± 10%
  • Oghere nkwụsị:900mm
  • Arọ:1500KG
  • Nkọwapụta

    Nkọwa

    Ubi ngwa

    Igwe a na-ejikọta ihe nleba anya dị elu na igwe nyocha nke ụwa n'ụzọ magburu onwe ya.Ọ nwere ike igbochi njehie nke mgbanwe gburugburu ebe obibi wetara n'oge usoro ule.Ịtọ ntọala dị iche iche nwere ike ịnwale -70 ℃~ 350 ℃ (nwere ike ịhazi) tensile, ike peeling, ikewapụ ike, ect.maka ihe nrapado na ebe okpomọkụ dị elu.Enwere ike ịgbanwe igwe a ka ọ bụrụ ihe nlere okpomọkụ na iru mmiri dị ka mkpa gị siri dị.Ọ bụ igwe nyocha ihe kacha mma maka kọleji na mahadum, ụlọ ọrụ nyocha, ụlọ ọrụ na ụlọ ọrụ nyocha ihe gbasara m.

    Nkọwapụta nke UTM

    Nlereanya

    GDW-200F

    GDW-300F

    Ike nnwale kacha

    200KN/ 20 tọn

    300KN 30 tọn

    Nwalee ọkwa igwe

    0.5 ọkwa

    0.5 ọkwa

    Nwale nha nha ike

    2% ~ 100% FS

    2% ~ 100% FS

    Njehie emetụtara nke ngosipụta ike nnwale

    N'ime ± 1%

    N'ime ± 1%

    Njehie emetụtara nke ihe ngosi mbugharị osisi

    N'ime ±1

    N'ime ±1

    Mkpebi mbugharị

    0.0001 mm

    0.0001 mm

    Oke mgbanwe ọsọ beam

    0.05 ~ 500 mm/min (a na-ahazi ya n'enweghị ihe ọ bụla)

    0.05 ~ 500 mm/min (a na-ahazi ya n'enweghị ihe ọ bụla)

    Njehie emetụtara nke ọsọ beam

    N'ime ±1% nke uru atọrọ

    N'ime ±1% nke uru atọrọ

    Oghere ịgbatị dị irè

    600mm ọkọlọtọ nlereanya (nwere ike ahaziri dị ka achọrọ)

    600mm ọkọlọtọ nlereanya (nwere ike ahaziri dị ka achọrọ)

    Ogologo ule dị irè

    600mm ọkọlọtọ nlereanya (nwere ike ahaziri dị ka chọrọ)

    600mm ọkọlọtọ nlereanya (nwere ike ahaziri dị ka chọrọ)

    Akụkụ

    1120×900×2500mm

    1120×900×2500mm

    Servo moto njikwa

    3KW

    3KW

    ịnye ọkụ

    220V± 10%;50HZ;4KW

    220V± 10%;50HZ;4KW

    Ibu igwe

    1350kg

    1500kg

    Nhazi isi: 1. Kọmputa ụlọ ọrụ 2. A4 ngwa nbipute 3. Otu igbe igbe dị elu na nke dị ala 4. Otu ihe eji eme ihe 5. Otu ihe eji eme mkpakọ

    Enwere ike ịhazi igbe na-abụghị ọkọlọtọ dị ka ihe ndị ahịa chọrọ

    Nkọwa nke tankị dị elu na nke dị ala

    Nlereanya

    HGD-45

    Nha nha

    Nha ime ụlọ: (D × W × H mm): ihe dịka 240×400×580 55L (nwere ike ịhazi ya)

    Temperature nso

    Akụkụ: (D×W ×H mm) ihe dịka 1500×380×1100 (nwere ike ịhazi ya)

    Izi ezi njikwa okpomọkụ

    Obere okpomọkụ -70 ℃elu okpomọkụ 350 ℃ ( customizable )

    Ịdị n'otu okpomọkụ

    ± 2ºC;

    Ọnụ ọkụ ọkụ

    ±2ºC

    oghere nleba anya

    34 ℃ / nkeji;

    Tnjikwa emperate

    Oghere oghere eletrọnịkị nlele iko ọkụ (mgbe okpomọkụ dị ogo 350, igwe anaghị agba nchara gbara ya gburugburu)

    Ihe mgbidi dị n'èzí

    PID akpaka njikwa okpomọkụ;

    Ihe mgbidi dị n'ime

    Ịfesa na oyi na-atụ ígwè efere;

    Ihe mkpuchi

    Jiri igwe anaghị agba nchara ihe;

     

     

     

     

     

    Usoro ntụ oyi

    ihe njikwa okpomọkụ: njikwa PID;

    b Ngwaọrụ mgbasa ozi ikuku: centrifugal fan;

    c Usoro ikpo ọkụ: nickel-chromium electric heater, mmanye ventilashion na n'ime ime mgbanwe okpomọkụ mgbanwe;

    d Ụzọ nju oyi: igwe mkpakọ refrigeration;

    e Ihe mmetụta okpomọkụ: nguzogide platinum;

    f Igwe nju oyi: igwe nju oyi abụọ;

     

     

     

     

     

    Ngwa nchekwa nchekwa

    Nbufe ike na nchebe sekit dị mkpirikpi;

    a The refrigeration compressor enweghị usoro nchebe;

    b Nchekwa ala;

    c Nchekwa oke okpomọkụ;

    d Igwe nju oyi dị elu na nchekwa dị ala.

    Mkpuchi na ntụkwasị obi

    Ekwesịrị ịgbanye pipeline usoro jụrụ oyi ma mechie nke ọma;

    Fọkụ ọkụ

    1 (ihe na-ekpuchi mmiri, ihe mgbawa, na-etinye ya n'ọnọdụ kwesịrị ekwesị, ngbanwe njikwa mpụga);

    Ma ọnụ ụzọ ọnụ ụzọ na ọnụ ụzọ ọnụ ụzọ ahụ nwere ngwaọrụ ọkụ eletrik iji gbochie condensation ma ọ bụ ntu oyi n'oge ule dị ala;

    Power ọkọnọ

    AC 220V,50Hz5.2KW

    Atụmatụ igodo

    1. The elu okpomọkụ ọkụ adopts drum-ụdị, kewaa Ọdịdị, eletriki iguzogide waya kpo oku, ọ pụrụ ịghọta nkenke nke okpomọkụ akara site akara kpo oku oge pasent.

    2. Onye na-ahụ maka okpomọkụ na PID Mode, dijitalụ na-egosipụta ọnọdụ ọnọdụ okpomọkụ na ịlele okpomọkụ.Nwalee okpomọkụ overshoot obere na Volatility obere.

    3. Nke a dị elu okpomọkụ ọkụ na-onwem na otu crank ogwe aka bracket, nke bụ connivent ịkwaga ọkụ n'ime ule ohere na-apụ mgbe okokụre.

    4. A na-edozikwa ngwaọrụ mkpuchi okpomọkụ na-ekpo ọkụ, enwere ike iji ya mee ihe maka ịkwalite ọrụ.

    Ọkọlọtọ

    ASTM, ISO, DIN, GB na ụkpụrụ mba ụwa ndị ọzọ.


  • Nke gara aga:
  • Osote:

  • img (3)

    Dee ozi gị ebe a ziga anyị ya